The ASRB-1x5 is a Relay Board used with Fire, Burglar or other Alarm Systems, Access Control, Remote Control or any application needing a DPDT contacts with a 5 amp contact rating. The ASRB-1x5 uses 12 or 24 VDC coil control. Use this model ASRB when applications demand more current than can be controlled by the ASRB-1. The ASRB-1x5 can be used in nearly any application requiring generic use of a relay. With low-voltage DC control, the ASRB-1x5 can be used to control remote lighting, cameras, timers, solenoids or many other remote switching needs, including coil input control of even a higher current relay for fan or pump motors. It can be mounted on almost any surface and is very easy to use. The coil input can use 12 or 24V with a typical 40 ma draw. The ASRB-1x5 is an excellent choice for remote control contacts of almost any device driven by up to 5 amps of current. Applications:     * Security systems     * Remote camera control     * Long-wire signal boost     * Light and Horn Annunciation     * Door release     * Robotics     * Hobby     * Small Motor Control     * Electrical Fence Control Specifications:     * 12, or 24 VDC operating voltage *     * 40 ma Coil operating current     * DPDT contacts with terminal strip terminations     * Max contact switching current:5 amps     * Max contact switching voltage: 30VDC or 120 VAC     * Fire resistant, voltage insulated case, 2"x 2" size         * (For 24 V cut the red jumper) Technical Documents:     * Configuration Examples